Transporting, Moving, and Storing Compressed Gas Cylinders
a) Valve protection caps shall be in place and secured.
b) When cylinders are hoisted, they shall be secured on a cradle, sling board, or pallet. They shall not be hoisted or transported by means of magnets or choker slings.
c) Cylinders shall be moved by tilting and rolling them on their bottom edges. They shall not be intentionally dropped, struck, or permitted to strike each other violently.
d) When cylinders are transported by powered vehicles, they shall be secured in a vertical position.
e) Valve protection caps shall not be used for lifting cylinders from one vertical position to another. Bars shall not be used under valves or valve protection caps to pry cylinders loose when frozen. Warm, not boiling, water shall be used to thaw cylinders loose.
f) Unless cylinders are firmly secured on a special carrier intended for this purpose, regulators shall be removed and valve protection caps put in place before cylinders are moved.
g) A suitable cylinder truck, chain, or other steadying device shall be used to keep cylinders from being knocked over while in use.
h) When work is finished, when cylinders are empty, or when cylinders are moved at any time, the cylinder valve shall be closed.
i) Compressed gas cylinders shall be secured in an upright position at all times, if necessary, for short periods of time while cylinders are actually being hoisted or carried.
j) Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour.
k) Inside of buildings, cylinders shall be stored in a well-protected, well-
ventilated, dry location, at least 20 feet (6.1 m) from highly combustible
materials such as oil or excelsior. cylinders should be stored in definitely
assigned places away from elevators, stairs, or gangways. Assigned storage
places shall be located where cylinders will not be knocked over or damaged
by passing or falling objects, or subject to tampering.
a) Valve protection caps shall be in place and secured.
b) When cylinders are hoisted, they shall be secured on a cradle, sling board, or pallet. They shall not be hoisted or transported by means of magnets or choker slings.
c) Cylinders shall be moved by tilting and rolling them on their bottom edges. They shall not be intentionally dropped, struck, or permitted to strike each other violently.
d) When cylinders are transported by powered vehicles, they shall be secured in a vertical position.
e) Valve protection caps shall not be used for lifting cylinders from one vertical position to another. Bars shall not be used under valves or valve protection caps to pry cylinders loose when frozen. Warm, not boiling, water shall be used to thaw cylinders loose.
f) Unless cylinders are firmly secured on a special carrier intended for this purpose, regulators shall be removed and valve protection caps put in place before cylinders are moved.
g) A suitable cylinder truck, chain, or other steadying device shall be used to keep cylinders from being knocked over while in use.
h) When work is finished, when cylinders are empty, or when cylinders are moved at any time, the cylinder valve shall be closed.
i) Compressed gas cylinders shall be secured in an upright position at all times, if necessary, for short periods of time while cylinders are actually being hoisted or carried.
j) Oxygen cylinders in storage shall be separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour.
k) Inside of buildings, cylinders shall be stored in a well-protected, well-
ventilated, dry location, at least 20 feet (6.1 m) from highly combustible
materials such as oil or excelsior. cylinders should be stored in definitely
assigned places away from elevators, stairs, or gangways. Assigned storage
places shall be located where cylinders will not be knocked over or damaged
by passing or falling objects, or subject to tampering.
No hay comentarios.:
Publicar un comentario